An 8′ Pipeline Pintail gun Single Fin model

An 8′ Pipeline Pintail gun Single Fin model. Shaped from a Burford Blank & glassed to last in 6oz by @micktheglasser with a gloss & polish finish. This photo was taken in Peter Grovers wet & dry polishing bay at PSM Glassing prior to the owner retiring & closing the Glassing business last year. @peter_grover @burfordblanks @darrenburford66 @markmonostewart2481 #markrichardssurfboards #markrichardscolordesigns #markrichardssprays #mrsinglefin #mrretrosinglefin #mr1974retropipelinepintailgun #psmglassing

Read more »

My son Kyle with the bottom of his 1976 Retro “Bustin Down The Door” Wing

My son Kyle with the bottom of his 1976 Retro “Bustin Down The Door” Wing Pin Single Fin model. It’s 7’8″ long. I posted a deck photo a few months ago. Retro rocker with a subtle flat panel Vee bottom & Concave flutes in the wings. Color sprayed by Mono & glassed in 6oz with a gloss & polish finish by the team at PSM Glassing. (Mick, Darren, Bruno & Peter). The owner of PSM retried & closed the Glassing factory last year. @kylerichards1 @peter_grover @micktheglasser @slimesboardstore @pop_diddy @markmonostewart2481 @markrichardssurfboardsapparel @mayhemsurfboards_mattbiolos #markrichardssurfboards #markrichardscolordesigns #markrichardssprays #mrsinglefin #mrretrosinglefin #mrbustindownthedoormodel #mr1976retrobustindownthedoor #mr1976retrobustindownthedoormodel #psmglassing

Read more »

A custom 1980 Retro Twin Fin model for JJ

A custom 1980 Retro Twin Fin model for JJ. There is a photo of the bottom of the board & photos of JJ’s sketches of both sides which he sent me to attach to the order form. This board was finished a few months ago & was sprayed by Mono & glassed by the PSM team just prior to the owner retiring & closing the Glassing business. I just discovered the photos on JJ’s Instagram, he posted them about a week ago. @pixjj @markmonostewart2481 @markrichardssurfboardsapparel @micktheglasser @peter_grover @mrpottz @surfboardempire #markrichardssurfboards #mrtwinfin #mrretrotwinfin #twinfinsrule #twinfinsforever #twinfinfever #twinfinfevercatchit #mr1980retrotwinfin #mr1980retrotwinfinmodel #psmglassing

Read more »

Mick Adam in Slimes Boardstore with Zac Settimo’s custom 7’6″ long, 191/2″ wide & 27/8″

Mick Adam in Slimes Boardstore with Zac Settimo’s custom 7’6″ long, 191/2″ wide & 27/8″ thick. “Bustin Down The Door” model. This model usually has a wing pin tail & a Magenta bottom but Zac wanted a Swallow & a Color change. He works in Slimes Boardstore in Newcastle & liked the Wing Swallow tail gun of mine on display. I used a template from 1985 of a 7’4″ wing Swallow gun I had made to take to Hawaii. Interesting how templates that I never thought I would use again come in handy 33 years later. Shaped out of a Burford Blank. Sprayed by Mono & glassed by the PSM team a few months ago. I don’t think he has ridden it yet, waiting for the perfect swell. @zacsettimo @slimesboardstore @kakek_slime @pop_diddy @timdickson @markrichardssurfboardsapparel @burfordblanks @darrenburford66 @aleutianjuice @markmonostewart2481 @peter_grover @micktheglasser @markplater #psmglassing #markrichardssurfboards #markrichardssprays #markrichardscolordesigns #mrsinglefin #mrretrosinglefin #mrbustindownthedoor #mr1976retrobustindownthedoor #mr1976retrobustindownthedoormodel

Read more »

A 1980 Retro Twin Fin sold by Slimes Boardstore in Newcastle recently

A 1980 Retro Twin Fin sold by Slimes Boardstore in Newcastle recently. 6’0″ long, 20″ wide & 23/4″ thick. Glassed by Mick, sprayed by Mono, Darren setting up fins, Bruno sanding, Rob on pin lines, Peter glossing & polishing. I’ve got lots of photos of boards with great sprays by Mono & incredible Glassing craftsmanship by the PSM team that I haven’t got around to posting which I’m going to try to get through. @slimesboardstore @kakek_slime @pop_diddy @timdickson @peter_grover @micktheglasser @markmonostewart2481 #psmglassing #markrichardssurfboards #markrichardssprays #markrichardscolordesigns #mrtwinfin #mrretrotwinfin #twinfinsforever #twinfinsrule #twinfinfever #twinfinfevercatchit #mr1980retrotwinfin #mr1980retrotwinfinmodel #mr1980retroprotwinfinmodel #mr1980retroprotwinfin

Read more »

The wing Swallow tail of Zac Settimo’s custom 7’6″ long “Bustin Down The Door” model

The wing Swallow tail of Zac Settimo’s custom 7’6″ long “Bustin Down The Door” model with a Concave flute in the wing. This model usually has a wing pin tail & a Magenta bottom but Zac wanted a Swallow & a Color change. He works in Slimes Boardstore in Newcastle & liked the Wing Swallow tail gun of mine on display. I used a template from 1985 of a 7’4″ wing Swallow gun I had made to take to Hawaii. Interesting how templates that I never thought I would use again come in handy 33 years later. Shaped out of a Burford Blank. Recently sprayed by Mono & glassed by the PSM team. @zacsettimo @slimesboardstore @kakek_slime @timdickson @pop_diddy @burfordblanks @darrenburford66 @markrichardssurfboardsapparel @markmonostewart2481 @peter_grover @micktheglasser @markplater #psmglassing #mrsinglefin #mrretrosinglefin #markrichardssurfboards #markrichardscolordesigns #markrichardssprays #mrbustindownthedoormodel #mr1976retrobustindownthedoor #mr1976retrobustindownthedoormodel

Read more »

The bottom of a custom for Zac Settimo from Slimes Boardstore Newcastle

The bottom of a custom for Zac Settimo from Slimes Boardstore Newcastle. It’s a 1980 Retro Pro Twin Fin model. 5’6″ long, 191/2″ wide & 25/8″ thick. Set up in a Twin Fin + Stabilizer fin configuration with FCS 2 Plugs. Sprayed by Mono & glassed by the PSM team, Mick, Darren, Bruno, Peter & Rob. I posted a photo of the deck a few days ago. @zacsettimo @slimesboardstore @kakek_slime @timdickson @pop_diddy @peter_grover @micktheglasser @fcs_surf @riklove72 @markmonostewart2481 #markrichardssurfboards #mrtwinfin #mrretrotwinfin #twinfinsrule #twinfinfever #twinfinfevercatchit #twinfinsforever #mr1980retrotwinfin #mr1980retrotwinfinmodel #mr1980retroprotwinfin #mr1980retroprotwinfinmodel #psmglassing

Read more »

The deck of a custom for Zac Settimo from Slimes Boardstore Newcastle

The deck of a custom for Zac Settimo from Slimes Boardstore Newcastle. A 1980 Retro Pro Twin Fin model. It’s 5’6″, 191/2″ wide & 25/8″ thick. Sprayed by Mono & glassed by the PSM team, Mick, Darren, Bruno, Peter & Rob. @zacsettimo @slimesboardstore @kakek_slime @timdickson @pop_diddy @markmonostewart2481 @peter_grover @micktheglasser #psmglassing #markrichardssurfboards #twinfinfever #twinfinsrule #twinfinforever #twinfinfevercatchit #mrtwinfin #mrretrotwinfin #mr1980retroprotwinfin #mr1980retroprotwinfinmodel #mr1980retrotwinfin #mr1980retrotwinfinmodel

Read more »

The owner of PSM Glassing closed the business in June as he wanted to retire

The owner of PSM Glassing closed the business in June as he wanted to retire after a lifetime of running the Glassing factory. I loved working with this crew & was sorry to see it end. PSM had glassed & sprayed my boards for many years. These Retro Twin Fins were sold by Slimes Boardstore in Newcastle recently & were some of the last ones glassed by Mick, sprayed by Mono, Darren setting up fins, Bruno sanding, Rob on pin lines, Peter glossing & polishing. From Left to Right, 1980 Retro – Vee Bottom, 1982 Concave Retro – Single to Double Concave bottom, 1978 Retro – Vee bottom. I’ve got lots of photos of boards with great sprays by Mono & incredible Glassing craftsmanship by the PSM team that I haven’t posted. Over the next month I’m going to try find them to post. @markmonostewart2481 @micktheglasser @peter_grover #psmglassing #markrichardssurfboards #markrichardscolordesigns #markrichardssprays #mrtwinfin #mrretrotwinfin #twinfinsrule #twinfinsforever #twinfinsrule #twinfinfever #twinfinfevercatchit #mr1980retrotwinfin #mr1980retrotwinfinmodel #mr1978retrotwinfin #mr1978retrotwinfinmodel #mr1982concaveretrotwinfin #mr1982concaveretromodel

Read more »

The owner of PSM Glassing closed the business in June as he wanted to retire

The owner of PSM Glassing closed the business in June as he wanted to retire after a lifetime of running the Glassing factory. I loved working with this crew & was sorry to see it end. PSM had glassed & sprayed my boards for many years. This is a Retro Twin Fin that Slimes Boardstore Newcastle sold recently. It was one of the last ones glassed by Mick, sprayed by Mono, Darren setting up fins, Bruno sanding, Rob on pin lines, Peter glossing & polishing. I’ve got lots of photos of boards with great sprays by Mono & incredible Glassing craftsmanship by the PSM team that I haven’t posted. Over the next month I’m going to try find them to post. @markmonostewart2481 @slimesboardstore @kakek_slime #markrichardssurfboards #markrichardssprays #markrichardscolordesigns #mrtwinfin #mrretrotwinfin #psmglassing #mr1980retrotwinfin #mr1980retrotwinfinmodel #twinfinsrule #twinfinfever #twinfinfevercatchit #twinfinsforever @micktheglasser @peter_grover

Read more »

MR on Instagram

Follow Mark on Instagram
instagram.com/markrichardssurfboards

Archives