Kim Brent’s custom Stingray Rounded Square Tail Thruster

Kim Brent’s custom Stingray Rounded Square Tail Thruster. 6’3″, 20″ wide, 21/2″ thick. The stringer timber is Black, it has not been painted after shaping. I shaped it from a @burfordblanks computer cut on Fitzy’s APS Shape 3D machine @fitzycooly It was glassed by Taka & the team @sun_glass_glassing @jaxbrent @noel.brent @timryan1959 @pop_diddy @surfboardempire @markrichardssurfboardsapparel @darrenburford66 @burfordblanks @fcs_surf @riklove72 @mikedurante #markrichardssurfboards #markrichardsshaping #markrichardsshapes #mrstingray #mrstingraymodel

Read more »

Noel Brent’s custom Stingray model Rounded Square Tail Thruster

Noel Brent’s custom Stingray model Rounded Square Tail Thruster. 6’2″, 201/4″ wide, 25/8″ thick. I shaped from a @burfordblanks computer cut on Fitzy’s APS Shape 3D machine @fitzycooly It was glassed by Taka & the team @sun_glass_glassing It has a full length carbon strip on the bottom. @jaxbrent @noel.brent @surfboardempire @burfordblanks @darrenburford66 @fcs_surf @riklove72 @mikedurante #markrichardssurfboards #markrichardsshaping #markrichardsshapes #mrstingray #mrstingraymodel

Read more »

Kim & Noel Brent’s custom Rounded Square Tail Thrusters

Kim & Noel Brent’s custom Rounded Square Tail Thrusters. Kim’s, Bkack Stringer, 6’3″, 20″ wide, 21/2″ thick. The timber is Black, it has not been painted after shaping. Noel’s, Piywood stringer, 6’2″, 201/4″ wide, 25/8″ thick. I shaped both from @burfordblanks computer cut of Fitzy’s APS Shape 3D machine. @jaxbrent @noel.brent @fitzycooly @darrenburford66 @markrichardssurfboardsapparel @surfboardempire #markrichardssurfboards #markrichardsshapes #markrichardsshaping #mrstingray #mrstingraymodel #mrbushranger #mrbushrangermodel #mrbushranger3 #mrbushranger3model #mrbushrangerroundedsquare #mrbushrangerroundedsquaremodel

Read more »

Photos of a custom “Stingray” model I shaped for Noel Brent just back from being

Photos of a custom “Stingray” model I shaped for Noel Brent just back from being glassed by TC Glasshouse @tonyc7 On his last board which is still in one piece we experimented with a full length Carbon strip down the bottom to try to lessen the chances of it breaking. He asked for this one to be glassed the same way. It’s 6’2″ long, 201/4″ wide & 25/8″ thick. Shaped from a Burford Blank @burfordblanks cut by @fitzycooly on a APS / Shape 3D machine. Single to Double Concave bottom with a Thruster Fin set up using FCS 2 Plugs. @noel.brent @will.brent @jaxbrent @pop_diddy @fcs_surf @riklove72 @rhemagraphics @surfboardempire @lostaustralia @sashstocker @matt_aldridge @darrenburford66 #markrichardssurfboards #mrstingraymodel #markrichardsshapes #markrichardsshaping

Read more »

A walk around a custom “Stingray” model I shaped for Noel Brent on Friday

A walk around a custom “Stingray” model I shaped for Noel Brent on Friday. It’s 6’2″ long, 201/4″ wide & 25/8″ thick. Noel & his brother Kim have been riding this model of mine for the last few years. The Stingray is an older model & has been replaced by the “Bushranger” model. They both like the Stingray so much that I can’t convince them to give the new model a try. Shaped from a Burford Blank. Single to Double Concave bottom with a Thruster Fin set up. The song playing in my shaping room is “Guaranteed” sung by Eddie Vedder from the “Into the Wild” movie soundtrack. @noel.brent @will.brent @jaxbrent @burfordblanks @pearljam @surfboardempire @tonyc7 #markrichardssurfboards #markrichardsshapes #markrichardsshaping #mrstingraymodel #mrbushrangermodel #mrbushranger3 #mrbushranger3model

Read more »

MR on Instagram

Follow Mark on Instagram
instagram.com/markrichardssurfboards

Archives