Hanging with 1976 World Champ Peter “PT” Townend at Off The Wall in Hawaii, mid 1980’s. Peter & I have been friends since the 1970’s when I’d go to the Goldy for school holidays & surf with he & Rabbit. We have…
3 shaped Twin Fin models in the Racks in my shaping room. From top to bottom, * MR x Mayhem California Twin. * Super Twin model. * Puffer Twin model. They are all Burford Bkanks & were computer cut on Fitzy’s APS Shape 3D machine. @pearljam @fitzycooly…
Blending & concaving the Swallow after cutting it out with a Saw. I’m using a small short Sureform as I find it easier to use than a standard long one when shaping Swallow Tails. The board is a stock 1980 Retro Pro Twin Fin model. The song playing…
A couple of 1980 Retro Twin Fins outside the @quiksilver store in Carcavelos, Portugal. MR Retro Twins & Super Twin models are available in Europe from Euroglass in Hossegor, France. @quiksilvercarcavelos @euroglass @stephenisbelly @anothery…
MR x Mayhem “California Twin” Fin model & a Super Twin model for Sean “Smurf” Lancaster @smurflanky Dimensions are… California Twin, 5’6″, 20″ wide, 2.36 thick, 28.5 Litres. Super Twin, 5’10”…
Vision of me spraying a Blue rail on a Super Twin model in my open air driveway spray bay recently. Spraying in my driveway is usually kinda challenging but I only do it occasionally on personal or my son’s boards., I don’t have a dedicated spray…
Vision of me using my Dad’s vintage Disston Hand Saw to cut off the nose section of the “rail bones” on a hand shape. I’m using the Saw vertically so it bends around the nose curve easier. The Bones came off in 2 sections as the template…
MR Retro shield Squegee logo print Tee Shirts available from @markrichardssurfboardsapparel This print Color matches one of the Color designs we do on my 1980 Retro Pro Twin Fin models. We can ship around Australia & internationally at www.markrichardssurfboardsapparel.com.…
“Behind The Curtain”, A video on Twin Fins & the range of fins I have with @fcs_surf Richie Lovett @riklove72 did the interview. Matt Baker @mattyjbakes & Nimai Strickland @nimaistrickland @mysurftv put it all together. If you…
Finished photos of the Double Wing Swallow I’ve been posting over the last few days. It’s 5’7″ kong, 215/8″ wide & 21/2″ thick. It doesn’t have a model name as it’s not a model in my range. It was…