Computer cut Burford Blanks in the back of my Toyota Kluger. They were cut by Fitzy on his APS Shape 3D machine & delivered to me by Surf Cargo. Three “Bushranger 3” Rounded Square models Two “Puffer Twin” models. @kimpindimar…
Computer cut Burford Blanks in the back of my Toyota Kluger today. They were cut by Fitzy on his APS Shape 3D machine & delivered to me by Surf Cargo. A Bushranger Round Pin step up, & 3 Puffer Twins. The top one is not as wide as it looks, the tail distorted…
A Puffer Twin model. It’s a stock size, 5’4″ long, 20″ wide & 23/8″ thick. 28.4 Litres. The tail has a defined Round Single Wing with a Swallow Tail. The bottom is Single to Double to Concave with modern rails. The Rocker…
FCS 2 Plugs in a variety of MR models. On the bottom, 2 sets in a 6’2″ 1980 Retro Pro Twin Fin. In the middle, 3 sets in a 5’5″ Puffer Twin for the option of riding it as a Twin or Twin + Stabilzer. On the top, 5 sets in a 6’6″…
My Puffer Twin on which I sprayed the Fluro Red & Blue rail. It’s a stock size, 5’8″ long, 201/2″ wide & 21/2″ thick. 32.8 Litres. The stock Tail Is a defined Round Single Wing with a Swallow Tail. The bottom is Single…
My Puffer Twin on which I sprayed the Fluro Red & Blue rail. It’s a stock size, 5’8″ long, 201/2″ wide & 21/2″ thick. 32.8 Litres. The 50 on the @quiksilver logo commerates 50 years of making board shorts & their…
My Puffer Twin on which I sprayed the Fluro Green & Blue rail. It’s a stock size, 5’9″ long, 205/8″ wide & 21/2″ thick. 33.7 Litres. It’s a new model for Summer which combines modern & Retro design features.…
Finished photos of the Puffer Twin on which I sprayed the yellow rail. It’s 5’8″ long, 201/2″ wide & 21/2″ thick. 32.8 Litres. It’s a new model for Summer which combines modern & Retro design features.…
Some boards I sprayed yesterday. The paint is water based & takes a few hours to dry. All are rail sprays in various Color combinations. They were sprayed open air backyard style in my driveway. The one with the Green rail was done last & as I was mixing…
Unveiling a Fluro Yellow rail spray I did on a Puffer Twin model. To tape & paper the deck & bottom took me about an hour. I’m a slow taper. I had to tape / paper the bottom as a lot of overspray would have collected on the bottom. Not as much as the…