Close up vision & the final piece of tape being removed. My Tech skills were not up to posting the 2 spray unveiling videos together this morning. It’s a 5’7″ Double Wing Swallow model I shaped recently. I needed the edges to come…
Unveiling the Fluro Magenta & Orange spray I did on a 5’7″ Double Wing Swallow model I shaped recently. I’m pulling the tape off the Orange slowly & gently so as not to lift off any of the Magenta paint off the Arc. It’s always…
Vision of me spraying in my driveway. I’m backed up against the garage door trying to keep in the shade. Being in the shade makes it easier to see if the Color coverage is coming out even. A mix of sun & shade on the bard makes it a lot harder to see if…
Progress photos of the Second Color added to a spray I started nearly 2 week ago. I had it taped up ready to spray the second Color but at the time had a brain fade & decided to sit it out. I get really indecisive over Color choice & when I start a spray I…
New Pearl Jam tees arrived in the mail from the merch section on their website. The one with the Axe print is last years Halloween tee. The photo was taken in my shaping room. The poster is from Pearl Jams “No Code” album & I did the rail sprays…
A Puffer Twin model for Tim Ryan. @timryan1959 Dimensions are 5’4″, 20″ wide & 23/8″ thick. 28.4 litres. I shaped it in the Lost Australia – Surfboard Empire factory in Tweed Heads. @surfboardempire It was glassed…
Finished photos of the Double Wing Swallow I’ve been posting over the last few days. It’s 5’7″ kong, 215/8″ wide & 21/2″ thick. It doesn’t have a model name as it’s not a model in my range. It was…
Cleaning up the outline plan shape with a small Sureform after cutting the excess foam off with a hand Saw. The Sureform is about 45 years old. I bought it in Hawaii at Sears in the Ala Moans shopping center. It’s a Sears – Craftsman brand. I’ve…
This is an oversize computer cut pre shape with a clean curvy outline & no wings. I’m retemplating the tail drawing on a double bump Wing Swallow tail. The cardboard template is from James Crawley’s 5’8″ vintage MR Twin Fin…
MR Super Twins, a MR Puffer Twin, a MR x Mayhem California Twin & a MR Bushranger Swallow Tail gun. The sprayed shape in the foreground is a California Twin. I did the sorays on all of these boards. @fiberglasshawaii @markrichardssurfboardsapparel…