The tail of an upcoming new model I finished yesterday arvo

The tail of an upcoming new model I finished yesterday arvo. It was going to have a single wing Swallow Tail with a Twin Fin + Stabilizer set up. While looking for something else I found this Double Wing Round Tail temp from 1984. I used to use it on small Single Fins back then. It actually fitted perfectly onto the computer cut pre shape so I went for it & converted the board into a Tri / Quad 5 Fin set up. A lot of my models that are computer cut come with a chopped off square tail which gives me some flexibility with customising tail shapes. @burfordblanks @slimesboardstore @surfboardempire @markrichardssurfboardsapparel @sashstocker @timdickson @pop_diddy @darrenburford66 #markrichardsshapes #markrichardsshaping #markrichardssurfboards #mrpufferfish #mrpuffer5model #mrpuffer5 #mrpuffer5triquad

Read more »

Reposted from @surfectionbyron some vision of various models

Reposted from @surfectionbyron some vision of various models. Not sure if they are all in stock as it may not be up to the minute vision. Contact Surfection for details. They are located in Banksia Drive in the Byron Bay Arts & Industrial estate details. @dean_sho2 @chris_athas #mrtwinfin #mrretrotwinfin #mrsupertwin #mrsupertwinmodel #mr1980retrotwinfin #mr1980retrotwinfinmodel #mr1980retroprotwinfin #mr1980retroprotwinfinmodel #mr1980retroprotwinfincarbonwrap #mrflyingfish #mrflyingfishmodel #mrpufferfish #mrpufferfishmodel #mrpuffer5model #mrpuffer5 #twinfinfever #twinfinfevercatchit #twinfinsrule #twinfinsforever

Read more »

Not much room left in my Toyota Kluger for the trip home to Newcastle from

Not much room left in my Toyota Kluger for the trip home to Newcastle from the Surfing Australia junior training camp on the NSW North Coast. Nine finished boards & 3 Computer Cut Burford Blanks. Of the nine boards in the car there are Super Twins, Flying Fish, Lone Ranger Bonzer Bat Tails, Bushrangers & the first couple of an updated Puffer Fish model that I have been working on. I think I’ve broken my own record for the most boards I have ever squeezed into this car & still have rear view vision. I actually think I could have got 2 more in the back. The trip home had some detours, up to Lost Australia on the Goldy & also via Nick Pope Glassing. @popesurfboardglassing @burtonautomotive @kimpindimar @lostaustralia @burfordblanks @darrenburford66 @surfboardempire #markrichardssurfboards #mrtwinfin #mrsupertwin #mrsupertwinmodel #mrflyingfish #mrflyingfishmodel #mrbushranger #mrbushrangermodel #mrbushranger3model #mrbushranger3 #twinfinsrule #twinfinfever #twinfinfevercatchit #twinfinsforever #mrloneranger #mrlonerangermodel #mrbonzerbatail #mrbonzerbattailmodel #mrpufferfish #mrpufferfishmodel #mrpuffertwinfin #mrpuffertwinfinmodel #mrpuffertwinfin2+1 #mrpuffertwinfinmodel2+1 #burtontoyota

Read more »

My boards at the front of the rack waiting to be glassed by Nick Pope

My boards at the front of the rack waiting to be glassed by Nick Pope at Pope Surfboard Glassing. Super Twins, Puffer Fish & Lone Ranger Bonzer Bat Tail models. @popesurfboardglassing #markrichardssprays #markrichardscolordesigns #markrichardssurfboards #mrtwinfin #mrsupertwin #mrsupertwinmodel #twinfinsrule #twinfinfever #twinfinsforever #twinfinfevercatchit #mrpufferfish #mrpufferfishmodel #mrloneranger #mrlonerangermodel #mrbonzerbattailmodel #mrbonzerbatail

Read more »

My pack job in the Toyota Kluger for the road trip up to the HPC

My pack job in the Toyota Kluger for the road trip up to the HPC on the NSW North Coast. I’m going for the Surfing Australia MR junior training camp. I’ve got 5 shaped Blanks that I’m dropping off on the way for Nick Pope to glass. 2 Super Twins, 2 Puffer Fish & a Lone Ranger Bonzer Bat Tail. ( My 2 boards are on the bottom under them ). @surfingaushpc @popesurfboardglassing @kimpindimar @burtonautomotive #maitlandtoyota #maitlandandportstephenstoyota #mrsupertwinmodel #mrsuoertwin #markrichardssprays #markrichardscolordesigns #markrichardssurfboards #twinfinsrule #twinfinsforever #twinfinfever #twinfinfevercatchit #mrloneranger #mrbonzerbattailmodel #mrpufferfish #mrpufferfishmodel #mrpuffertwinfinmodel #mrpuffertwinfin #markrichardsshapes #markrichardsshaping

Read more »

A selection of various MR models on the lawn in front of Surfection located in

A selection of various MR models on the lawn in front of Surfection located in the Arts & Industry Estate, Byron Bay. 1980 Retro Pro Twin Fins, Flying Fish, Puffer Fish & Super Twin models. Glassed by the team at PSM & sprayed by Mono. Repost from Surfection Byron Bay. @surfectionbyron @dean_sho2 @chris_athas @markmonostewart2481 #markrichardssurfboards #mr1980retroprotwinfinmodel #mr1980retroprotwinfin #mrtwinfin #mrretrotwinfin #mrpufferfish #mrpufferfishmodel #mrflyingfish #mrflyingfishmodel #markrichardssprays #markrichardscolordesigns #psmglassing #twinfinsrule #twinfinfever #twinfinfevercatchit #twinfinsforever #mrsupertwin #mrsupertwinmodel

Read more »

My friend Mick Adam with his shaped blank delivery from me yesterday arvo

My friend Mick Adam with his shaped blank delivery from me yesterday arvo. A Lone Ranger & Puffer Fish model which usually have Thruster fin set ups. These two boards came from KKL computer cuts with quite a bit of reshaping. New nose & tail curves with a wing Swallow added. Plus a conversion from Thruster fin positioning to Twin Fin + Stabilizer positioning. Shaped from Burford Blanks. Mick is Glassing & Sanding these in his backyard so his understanding neighbours are about to get their more than occasional dose of resin fumes & sanding dust on their washing. The Free Ride Replica model under them belongs to Austin Emery & was being dropped at Slimes Boardstore in King St Newcastle. It’s going up on Surf Freight to Austin on the Sunny Coast. @aussiepienpeas @pop_diddy @slimesboardstore @timdickson @kakek_slime @barrell_head @jmanradshred @kklmachine @coopswinz @burfordblanks @darrenburford66 @sashstocker @lostaustralia @mayhemsurfboards_mattbiolos @dahlbergsurfboards #markrichardsshapes #markrichardssurfboards #markrichardsshaping #mrtwinfin #mrsupertwin #mrsupertwinmodel #mrloneranger #mrlonerangermodel #mrpufferfish #mrpufferfishmodel #twinfinfever #twinfinfever #twinfinfevercatchit #twinfinsrule

Read more »

A mix of finished boards & KKL computer cut pre shapes in my room

A mix of finished boards & KKL computer cut pre shapes in my room. On the wall racks are a finished 6’1″ Super Twin for me. Finished Lone Ranger & Puffer Fish models that have both been reshaped into experimental modern Twin Fins for my friend Mick Adam. A 5’10” Bushranger computer cut in the RHS corner for my friend Tim Ryan that is also getting re shaped into something else. My friends surf well & are always up for being experimented on. I can always rely on them for honest feedback. The one on the stands with the timber template laying on it is an oversized pre shape which I’m retemplating & shaping into a potential new model. All the Blanks are Burford’s. @burfordblanks @darrenburford66 @markrichardssurfboardsapparel @pearljam @pop_diddy @slimesboardstore @barrell_head @jmanradshred @coopswinz @kklmachine @timryan1959 @timdickson @lostaustralia @surfboardempire @sashstocker #markrichardssurfboards #markrichardsshaping #markrichardsshapes #mrtwinfin #mrsupertwin #mrsupertwinmodel #mrpufferfish #mrpufferfishmodel #mrloneranger #mrlonerangermodel #mrbushranger #mrbushrangermodel #mrbushranger3 #mrbushranger3model #twinfinsrule #twinfinsforever #twinfinfever #twinfinfevercatchit

Read more »

A batch of stock Flying Fish & Puffer Fish models that just arrived at Surfection

A batch of stock Flying Fish & Puffer Fish models that just arrived at Surfection in Byron Bay. Surfection is located in the old Mad Dog building on the Byron Bay Arts & Industry estate. Glassed by the team at PSM, Professional Surfboard Manufacturing. Sprayed by Mono, glassed by Mick, Darren setting up fins, Bruno sanding, Peter wet & drys / polishes, & Rob doing a bit of everything. @dean_sho2 @chris_athas @surfectionbyron @peter_grover @markmonostewart2481 #markrichardssurfboards #markrichardscolordesigns #psmglassing #mrflyingfish #mrflyingfishmodel #mrpufferfish #mrpufferfishmodel @fenechsurf

Read more »

Mono’s spray rack at PSM Glassing in Byron Bay

Mono’s spray rack at PSM Glassing in Byron Bay. I sprayed the 7’4″ half green, half orange board at the front of the rack, It’s my 1979 Replica of one of the single fins I rode in the Hawaiian contests in 1979. Mono sprayed the rest of the boards most of which are “Puffer Fish” models headed to Alex Surf on the “sunny” coast in Queensland. They are Thrusters with a single to double Concave bottoms & a double wing swallow tail. @alex_surfshop @markmonostewart2481 #psmglassing #markrichardssprays #markrichardsshapes #markrichardsshaping #markrichardscolordesigns #markrichardssurfboards #mr1979retrosinglefin #mr1979retrosinglefinmodel #mr1979hawaiicontestquiver #mr1979retrocontestquiver #mrsinglefin #mrretrosinglefim #mrpufferfish #mrpufferfishmodel

Read more »

MR on Instagram

Follow Mark on Instagram
instagram.com/markrichardssurfboards

Archives