Quiksilver Orange County rep Benny Bigler at the Surf Ranch on a MR Mega Twin

Quiksilver Orange County rep Benny Bigler at the Surf Ranch on a MR Mega Twin model @benny_big Its 5’10”, 191/2″ wide & 23/8″ thick. The spray replicates one I did on a Twin Fin of mine in the mid 1980’s. The board was made in Australia two years ago & Chad Wells lugged it home for Benny after the @quiksilver Pro on the Goldy. Chad also took the photo @cidoubleyou Mono did the spray on this one @markmonostewart2481 @mikereilly1 @fuzzy66 @boardridersmalibu @kswaveco @catalystsanclemente #markrichardssurfboards #markrichardscolordesigns #markrichardssprays #mrtwinfin #twinfinsrule #twinfinfever #twinfinfever #twinfinfevercatchit #mrmegatwin #mrmegatwinmodel #surfranch

Read more »

A quiver of MR’s, (not mine )

A quiver of MR’s, (not mine ). The age spread would be around 40 years. The newest board would the one with black / red stripes & was made in 2018. The oldest would be one of the first two, guessing from the late 1970’s. From Left to Right, 5’10” & 6’2″ late 70’s vintage original Twin Fins. 6’2″ 1982 Retro Twin. 6’3″ Mega Twin model. 6’4″ Free Ride Retro Twin model. MR Free Ride Skaeboard. 6’6″ Bushranger Round tail Thruster model & 6’9″ Thruster mini gun. #markrichardssprays #markrichardscolordesigns #markrichardssurfboards #mrtwinfin #mrretrotwinfin #mr1978retrotwinfin #mr1978retrotwinfinmodel #mr1980retrotwinfin #mr1980retrotwinfinmodel #twinfinsforever #twinfinsrule #twinfinfever #twinfinfevercatchit #mrmegatwin #mrmegatwinmodel #mr1982retrotwinfin #mr1982retrotwinfinmodel #mrfreeridemodel #mrfreeridetwinfinmodel #mrfreerideretrotwinfinmodel #mrbushranger #mrbushrangermodel #mrbushrangerroundtailmodel #mrbushrangerroundtail #mrbushrangerroundpin #mrbushrangerroundpinmodel

Read more »

Mono’s sprayed board rack at PSM Glassing

Mono’s sprayed board rack at PSM Glassing. A custom 5’5″ Bushranger model for Kynan. A 6’3″ Mega Twin for Nathaniel. A 6’4 1978 Retro Twin Fin for Eric Tanimura. A 5’10” Super Twin for Merewether Boardriders Club & some Bustin Down The Door Models. @markmonostewart2481 @bellst204 #psmglassing #markrichardssurfboards #markrichardssprays #mrtwinfin #mrsupertwin #mrretrotwinfin #mrsupertwinmodel #mr1978retrotwinfin #mr1978retrotwinfinmodel #mrbushrangermodel #mrbushranger #mrmegatwin #mrmegatwinmodel #mr1976retrobustindownthedoor #mr1976retrobustindownthedoormodel #twinfinsrule #twinfinsforever

Read more »

A custom Mega Twin Model ordered through Alex Surf Shop on the “Sunny Coast”

A custom Mega Twin Model ordered through Alex Surf Shop on the “Sunny Coast”. It’s 6’6″ long, 201/2″ wide & 23/4″ thick. Set Soar Fins made by Greg Trotter with an FCS 2 plug in the tail for the option of adding a stabiliser Fin. Color sprayed by Mono & glassed at PSM. Scroll left for a photo of the bottom. @fcs_surf @markmonostewart2481 @alex_surfshop #markrichardssurfboards #mrtwinfin #mrmegatwin #mrmegatwinmodel #twinfinfevercatchit #twinfinfever #twinfinsforever #twinfinsrule #psmglassing #soarfins #soarfinsaustralia

Read more »

A custom “Mega Twin” model for Richard Saltmarsh ordered through Slimes Surf & Skate in

A custom “Mega Twin” model for Richard Saltmarsh ordered through Slimes Surf & Skate in Newcastle. It’s 5’8″ long, 193/8″ wide & 23/8″ thick. Sprayed in Fluro colors by Mono & glassed by Mick & the team at PSM Glassing in Byron Bay. It has a 4oz bottom & a 6/4 deck with a gloss & polish finish. @slimes_surf_skate @kakek_slime #psmglassing #mrmegatwinmodel #mrmegatwin #markrichardssurfboards #mrtwinfin #twinfinfever #twinfinsrule #twinfinsforever #twinfinfevercatchit

Read more »

This “Mega Twin” model was a custom for Benny Bigler who lives in California, Chad

This “Mega Twin” model was a custom for Benny Bigler who lives in California, Chad Wells is out for the Quiksilver Pro & is stuffing it in his board bag to take back. It’s 5’10” long, 191/2″ wide & 23/8″ thick. Glassed definitely not too last all in 4oz with a sanded wet & dry pro finish it’s come out nice & light so it should feel super lively. The bottom is single to double concave & it’s set up with three FCS 2 plugs in a Twin Fin plus Stabilizer configuration. Mono did the spray. @benny_big @cidoubleyou @mikereilly1 @quiksilver @fcs_surf @markmonostewart2481 #twinfinfever #twinfinfevercatchit #twinfinsforever #twinfinsrule #mrtwinfin #markrichardssurfboards #mrmegatwin #mrmegatwinmodel #psmglassing

Read more »

Nate Yeomans custom MR “Mega Twin” model pre shape which was cut in San Diego

Nate Yeomans custom MR “Mega Twin” model pre shape which was cut in San Diego on a KKL machine. It’s 5’7″ long, 191/2″ wide & 23/8″ thick. This model is a little wider in the nose & has a slightly flatter deck compared to a Super Twin. The bottom is Single To Double concave & Fin set up is Twins up front & a small Stabiliser fin in the tail. @bigdeluxe_ @mayhemb3_mattbiolos @lostsurfboards #markrichardssurfboards #mrmegatwin #mrmegatwinmodel #mrtwinfin #cncshapes

Read more »

A Custom “Mega Twin” model for Leigh ordered through Dripping Wet in Manly

A Custom “Mega Twin” model for Leigh ordered through Dripping Wet in Manly. It’s 6’2″, 20″ wide & 25/8″ thick. This is similar to my Super Twin model with a few changes. Slightly wider plan shape, a flatter rocker & a little more foam in the rail. The bottom is single to double concave. The twin fin set up using FCS2 plugs has been reconfigured to Thruster – Quad positioning. #mrmegatwin #mrmegatwinmodel #markrichardssurfboards @drippingwetsurfshop @fcs_surf

Read more »

Jeff Deffenbaugh with his new 5’8″ “Mega Twin”

Jeff Deffenbaugh with his new 5’8″ “Mega Twin”. A custom shape from me made in Australia was part of the first prize in an event sponsored by Quiksilver in California. “The 2015 Triple Crown Of Retro Surfing” which was a trifecta of 3 events, Sunset 60’s, Surfside 70’s & HB 80’s. Jeff won & we spent about 10 minutes in The Frog House Surf Shop working out the board order on a scrap of paper when I was in California a few months ago. Jeff kinda gave me free reign with shape, model & colors. The only spec was it had to be a Twin Fin. @benny_big @fuzzy66 @jeffdeffenbaugh1 @surfside_70’s @jaylars @mikereilly1 @cidoubleyou @quiksilver @quiksilver_originals #markrichardssurfboards #mrmegatwinmodel #mrtwinfin @froghouse @bmcknight @rcastroo2 @chrisdarrah @pierre_agnes @stephenisbelly @taywhis

Read more »

MR on Instagram

Follow Mark on Instagram
instagram.com/markrichardssurfboards

Archives