Andrew Feeney collecting his custom Bushranger Round Tail model from @slimesboardstore in King Street, Newcastle

Andrew Feeney collecting his custom Bushranger Round Tail model from @slimesboardstore in King Street, Newcastle this arvo. It’s 6’6″ long, 201/4″ wide & 23/4″ thick. 39.2 Litres., Single to Double Concave bottom. @andofeeney @kakek_slime @timdickson @pop_diddy @surfboardempire #markrichardssurfboards #markrichardscolordesigns #markrichardssprays #mrbushranger #mrbushrangermodel #mrbushrangerroundtail #mrbushrangerroundtailmodel

Read more »

Rick Boyer’s custom Bushranger Round Tail model ordered through Slimes Boardstore in Newcastle

Rick Boyer’s custom Bushranger Round Tail model ordered through Slimes Boardstore in Newcastle. It’s 5’9″, long, 191/8″ wide & 23/8″ thick, 28.6 Litres. Set up with 5 sets of FCS 2 Plugs for the option of riding it as a Thruster or Quad. Glassed by the team at TC Glasshouse on the “Goldy” @tonyc7 Sprayed by Brett Palmer @_mkbn_ @rickboyer81 @slimesboardstore @kakek_slime @surfboardempire @pop_diddy @timdickson @fcs_surf @riklove72 #markrichardssprays #markrichardssurfboards #markrichardscolordesigns #mrbushranger #mrbushrangermodel #mrbushranger3 #mrbushranger3model #mrbushrangerroundtail #mrbushrangerroundtailmodel

Read more »

A walk around a Bushranger “Round Tail” model I shaped recently

A walk around a Bushranger “Round Tail” model I shaped recently. It’s a custom for Dave Vorlicek, 5’9″ long, 191/2″ wide & 23/8″ thick. The Blank is a Burford with a Black stringer & it was computer cut on Fitzy’s machine. Fins will be set up with 5 sets of FCS 2 Plugs in a Tri / Quad configuration. The song playing in my shaping room is Eddie Vedder singing “society” , Into The Wild soundtrack. @sharonvorlicek @slimesboardstore @surfboardempire @fitzycooly @burfordblanks @darrenburford66 @pearljam @fcs_surf @riklove72 #markrichardsshapes #markrichardsshaping #markrichardssurfboards #mrbushranger #mrbushrangermodel #mrbushranger3 #mrbushranger3model #mrbushrangerroundtail #mrbushrangerroundtailmodel

Read more »

Sean Shotter’s custom Bushranger Round Tail model ordered through Slimes Boardstore in Newcastle

Sean Shotter’s custom Bushranger Round Tail model ordered through Slimes Boardstore in Newcastle. It’s 6’6″ long, 201/4″ wide & 23/4″ thick. Set up with 5 sets of FCS 2 Plugs for the option of riding it as a Thruster or Quad. Glassed by TC Glasshouse with a 4 oz bottom & a 6/4 deck. Sprayed by Brett Palmer. @slimesboardstore @surfboardempire @seanshotter @_mkbn_ @tonyc7 @fcs_surf @riklove72 @kakek_slime #markrichardssprays #markrichardssurfboards #markrichardscolordesigns #mrbushranger #mrbushrangermodel #mrbushranger3 #mrbushranger3model #mrbushrangerroundtail #mrbushrangerroundtailmodel

Read more »

Slimes Boardstore, King Street, Newcastle fully stocked with various MR models

Slimes Boardstore, King Street, Newcastle fully stocked with various MR models. 1980 Retro Pro Twin Fins. Super Twins. MR x Mayhem California Twins. Flying Fish. Bushranger Round Tails. Call 02 49613088 for details. @slimesboardstore @kakek_slime @pop_diddy @timdickson @surfboardempire @sashstocker @tonyc7 @_mkbn_ #markrichardssurfboards #markrichardssprays #markrichardscolordesigns #mrtwinfin #mrsupertwin #mrretrotwinfin #mrsupertwinmodel #mrflyingfish #mrflyingfishmodel #twinfinsrule #twinfinsforever #twinfinfever #twinfinfevercatchit #mrbushrangerroundtail #mrbushrangerroundtailmodel #mr1980retrotwinfin #mr1980retrotwinfinmodel #mr1980retroprotwinfin #mr1980retroprotwinfinmodel #mrxmayhem #mrxmayhemcaliforniatwin #mrxmayhemcatwin #mrxmayhemcaliforniatwinmodel

Read more »

A custom Bushranger Round Tail model for Tony Bell ordered through Slimes Boardstore in King

A custom Bushranger Round Tail model for Tony Bell ordered through Slimes Boardstore in King Street Newcastle. Its 6’5″ long, 193/4″ wide & 29/16″ thick. The bottom is Single to Double Concave & it has a Thruster fin set up using FCS 2 Plugs. It was glassed by TC Glasshouse & sprayed by Brett Palmer. @slimesboardstore @kakek_slime @timdickson @pop_diddy @surfboardempire @tonyc7 @_mkbn_ @fcs_surf @riklove72 #markrichardssurfboards #markrichardssprays #markrichardscolordesigns #mrbushranger #mrbushrangermodel #mrbushranger3 #mrbushranger3model #mrbushrangerroundtail #mrbushrangerroundtailmodel

Read more »

A quiver of MR’s, (not mine )

A quiver of MR’s, (not mine ). The age spread would be around 40 years. The newest board would the one with black / red stripes & was made in 2018. The oldest would be one of the first two, guessing from the late 1970’s. From Left to Right, 5’10” & 6’2″ late 70’s vintage original Twin Fins. 6’2″ 1982 Retro Twin. 6’3″ Mega Twin model. 6’4″ Free Ride Retro Twin model. MR Free Ride Skaeboard. 6’6″ Bushranger Round tail Thruster model & 6’9″ Thruster mini gun. #markrichardssprays #markrichardscolordesigns #markrichardssurfboards #mrtwinfin #mrretrotwinfin #mr1978retrotwinfin #mr1978retrotwinfinmodel #mr1980retrotwinfin #mr1980retrotwinfinmodel #twinfinsforever #twinfinsrule #twinfinfever #twinfinfevercatchit #mrmegatwin #mrmegatwinmodel #mr1982retrotwinfin #mr1982retrotwinfinmodel #mrfreeridemodel #mrfreeridetwinfinmodel #mrfreerideretrotwinfinmodel #mrbushranger #mrbushrangermodel #mrbushrangerroundtailmodel #mrbushrangerroundtail #mrbushrangerroundpin #mrbushrangerroundpinmodel

Read more »

A stock 6’0″ Bushranger Roundtail model I shaped for Slimes Newcastle Boardstore recently

A stock 6’0″ Bushranger Roundtail model I shaped for Slimes Newcastle Boardstore recently. It was glassed at TC Glasshouse on the Goldy. @tonyc7 Dimensions are 191/2″ wide & 21/2″ thick, about 31.5 litres. Fins are set up with five sets of FCS 2 Plugs for a Thruster / Quad option. It has a single to Double Concave bottom & was shaped from a Burford Blank. This board arrived at Slimes on Surf Cargo yesterday afternoon. @slimesboardstore @kakek_slime @pop_diddy @timdickson @fcs_surf @riklove72 @mikedurante @darrenburford66 @burfordblanks #markrichardssurfboards #markrichardsshapes #markrichardsshaping #mrbushranger #mrbushrangermodel #mrbushranger3 #mrbushranger3model #mrbushrangerroundtail #mrbushrangerroundtailmodel

Read more »

A stock 6’0″ Bushranger Roundtail model I shaped for Slimes Boardstore recently

A stock 6’0″ Bushranger Roundtail model I shaped for Slimes Boardstore recently. It’s now up on the “Goldy” to be glassed at TC Glasshouse. Dimensions are 191/2″ wide & 21/2″ thick, about 31.5 litres. Fin set up is with five sets of FCS 2 Plugs for a Thruster / Quad option. It has a single to Double Concave bottom & was shaped from a Burford Blank. @tonyc7 @surfboardempire @burfordblanks @darrenburford66 @fcs_surf @riklove72 @sashstocker @lowenshaper @matt_aldridge @slimesboardstore @kakek_slime @timdickson @pop_diddy @lostaustralia #markrichardssurfboards #mrbushranger #markrichardsshapes #markrichardsshaping #mrbushrangermodel #mrbushranger3 #mrbushranger3model #mrbushrangerroundtailmodel #mrbushrangerroundtail

Read more »

Newcastle Slimes Boardstore manager Mick Adam with Darren Shone’s custom 5’11”, 193/8″, 23/8″ Bushranger Roundtail

Newcastle Slimes Boardstore manager Mick Adam with Darren Shone’s custom 5’11”, 193/8″, 23/8″ Bushranger Roundtail model. You try to do your best with every board but sometimes some come out looking & feeling extra special. This was one of them. The Round Tail was a combination of a few of my tail templates & I liked the end result so much that I made a cardboard template of it. I do this a lot so I have a stash of cereal boxes on hand to use to make quick easy tail templates. It has a Single to Double Concave bottom, set up with 5 sets of FCS2 plugs for a Tri / Quad option. Glassed with a 4oz bottom & double 4oz deck. @shoney230 @pop_diddy @slimesboardstore @timdickson @kakek_slime @merewethersurfboardclub @fcs_surf @riklove72 @surfboardempire @sashstocker @lowenshaper #markrichardssurfboards #mrbushranger #mrbushrangermodel #mrbushranger2 #mrbushranger2model #mrbushranger3 #mrbushranger3model #mrbushrangerroundtail #mrbushrangerroundtailmodel

Read more »

MR on Instagram

Follow Mark on Instagram
instagram.com/markrichardssurfboards

Archives