Blog Archives

My son Nathan’s finished Bushranger 3 Swallow Tail step up model

My son Nathan’s finished Bushranger 3 Swallow Tail step up model. It’s 6’2″ long, 191/2″ wide & 23/8″ thick. I’ve got no idea of the litreage. It has a very slight bump wing to break the tail curve outline…

Read more »

Posted in Latest News Tagged with: , , , , , , , , , , ,

The finished Fluro Green & Yellow Rail spray that I did on my son Nathan’s

The finished Fluro Green & Yellow Rail spray that I did on my son Nathan’s Bushranger 3 Swallow Tail step up model. It’s 6’2″ long, I sprayed it recently open air style in my driveway. The paint is water based. The edges come…

Read more »

Posted in Latest News Tagged with: , , , , , , , , , , ,

The first photo is of the finished tail of Tim Ryan’s custom Bushranger Swallow Tail

The first photo is of the finished tail of Tim Ryan’s custom Bushranger Swallow Tail model which had the dent in the bottom of the shaped blank. I had accidentally bashed it on an overhead rack. The second photo is of the shaped blank showing the dent.…

Read more »

Posted in Latest News Tagged with: , , , , , , ,

Some MR’s ready to be sanded in the rack at Nick Pope Surfboard Glassing

Some MR’s ready to be sanded in the rack at Nick Pope Surfboard Glassing. They are all Bushranger models. The fist board is a 6’6″ Swallow Tail “step up”. Followed by a 5’10” Rounded Square & a 6’4″…

Read more »

Posted in Latest News Tagged with: , , , , , , , , , ,

A dent in the bottom of Tim Ryan’s custom shaped blank “Bushranger” model

A dent in the bottom of Tim Ryan’s custom shaped blank “Bushranger” model. I was nearly finished & I lifted it off my shaping stands & swung it around in the air to put it down on its nose tip so I could run my hands down the rails for…

Read more »

Posted in Latest News Tagged with: , , , , , , , , ,

Finished photos of the Red rail spray I did on my “Bushranger” Swallow Tail gun

Finished photos of the Red rail spray I did on my “Bushranger” Swallow Tail gun model. It’s 7’2″ long, 191/2″ wide & 23/4″ thick. I got asked on Instagram yesterday about the volume. I’ve got no…

Read more »

Posted in Latest News Tagged with: , , , , , , , , , , , ,

Vision of me pulling the tape off the stringer on the nose tip then the

Vision of me pulling the tape off the stringer on the nose tip then the tape / paper off the deck of a board I sprayed the rail on last week. Even though I was only spraying the rail the deck & the bottom need to be protected from overspray & under spray.…

Read more »

Posted in Latest News Tagged with: , , , , , , , , , , , ,

Video walk around a board I finished Saturday arvo

Video walk around a board I finished Saturday arvo. It’s a Bushranger Swallow tail gun. 7’2″ long, 191/2″ wide & 23/4″ thick. The under chest thickness is carried up into the nose area so it will paddle really well.…

Read more »

Posted in Latest News Tagged with: , , , , , , , , , , ,

Tim Ryan’s second custom Bushranger model just back from TC Glasshouse

Tim Ryan’s second custom Bushranger model just back from TC Glasshouse. It’s a Swallow tail mini gun for good surf, 6’6″ long, 19″ wide & 23/8″ thick. Set up with five sets of FCS 2 Plugs for a Thruster / Quad option.…

Read more »

Posted in Latest News Tagged with: , , , , , , ,

Tim Ryan’s custom Bushranger model Swallow Tail just back from TC Glasshouse

Tim Ryan’s custom Bushranger model Swallow Tail just back from TC Glasshouse. It’s 5’10” long, 19″ wide & 23/8″ thick. Set up with five sets of FCS 2 Plugs for a Thruster / Quad option. Glassed “not to…

Read more »

Posted in Latest News Tagged with: , , , , , , ,

MR on Instagram

Follow Mark on Instagram instagram.com/markrichardssurfboards

Archived Posts