Behind my shaping room

Behind my shaping room. A “Puffer Twin” model computer cut & a couple of my personal Retro Twin Fin models. A “1980 Special Edition Stubbies” Replica & a 1981 World Title Replica. Both are 6’2″ long. The sprays on these two boards were a Colab with Mark “Mono” Stewart. I sprayed the decks & rail colors on them & Mono sprayed the Pin Lines for me. @markmonostewart2481 @markrichardssurfboardsapparel #markrichardssurfboards #markrichardscolordesigns #markrichardssprays #mrtwinfin #mrretrotwinfin #twinfinsrule #twinfinfever #twinfinfevercatchit #twinfinsforever #mr1980retrotwinfin #mr1980retrotwinfinmodel #mr1981retrotwinfin #mr1981retroworldtitletwinfinreplicamodel #mr1981retrotwinfinmodel #mr1981retroworldtitletwinfinreplica #mr1980retrospecialeditiontwinfinmodel #mr1980retrospecialeditiontwinfinmodel

Read more »

A bottom turn shot from the early 1980’s during the Rip Curl Easter Classic at

A bottom turn shot from the early 1980’s during the Rip Curl Easter Classic at Bells Beach. The board is either a 6’2″ or a 6’4″ twin fin. My contest quiver consisted of a 6’2″ for small surf & the 6’4″ was the “step up” in case the surf got bigger. I did the Color designs on them as well as the Glassing & decal set ups, both were identical so in this case I can’t tell which one it was…. I think it was the 6’4″ which is on display in a glass case in Torquay at Surfworld / Australia Surfing Museum. Sorry I don’t know who took the photo, I found it on Instagram @silversurfer0161 @ripcurl_aus @neilridgway @surfview @anothery @seano888 @australianationalsurfingmuseum @mfanno @markrichardssurfboardsapparel @ripcurl_usa @ripcurl_newcastle @ripcurl_europe @surfboardempire #markrichardssurfboards #markrichardssprays #markrichardscolordesigns #mrtwinfin #mrretrotwinfin #twinfinsrule #twinfinfever #twinfinfevercatchit #twinfinsforever #mr1981retrotwinfin #mr1981retroworldtitletwinfinreplica #mr1981retroworldtitletwinfinreplicamodel #mr1981retrotwinfinmodel #mr1980retrotwinfin #mr1980retrotwinfinmodel #ripcurlbellsbeachpro #bellsbeach

Read more »

•Cheyne Horan on a Geoff McCoy shaped Single Fin

•Cheyne Horan on a Geoff McCoy shaped Single Fin., ( Pink shorts ). •Shaun Tomson on a Spider Murphy shaped Safari Twin Fin, ( Red shorts ). •Chris “Critta” Byrne on a Phil Byrne shape, (Yellow shorts) Single Fin ? •Dane Kealoha on a Town & Country Twin Fin, ( Red – Yellow board ). •I’m on the last wave on a 6’2″ Twin Fin which I shaped, sprayed & glassed, ( Orange deck, green / blue rails ). It was 201/2″ wide & 27/8″ thick. Deep Vee bottom with a hard resin edge from nose to tail. @greenroomsurfmovies vision shot at Burleigh Heads on the Goldy during the Stubbies event about 38 years ago. There were no contest singlets worn at this event. It was man on man & we wore either Red or Yelliw board shorts for judging identification. @cheynehoran @spidermurphysurf @byrne_surf @tcsurfboards @tcsurfshop @tandcaloha @surfboardempire @slimesboardstore @mccoysurfboards.australia @shauntomson @markrichardssurfboardsapparel #markrichardssurfboards #mrtwinfin #mrretrotwinfin #twinfinsrule #twinfinfever #twinfinfevercatchit #twinfinsforever #mr1980retrotwinfin #mr1980retrotwinfinmodel #mr1982retrotwinfinmodel #mr1982retrotwinfin #mr1981retrotwinfin #mr1981retrotwinfinmodel #mr1981retroworldtitletwinfinreplicamodel #mr1981retroworldtitletwinfinreplica

Read more »

This is the 1981 Retro Twin Fin I posted earlier

This is the 1981 Retro Twin Fin I posted earlier. It has been sold. Thanks to everyone who responded. There was a lot of interest and to be fair to everyone I tried to respond in order of messages. If I didn’t respond , sorry but it was too late as the board was sold. @rhemagraphics @lh_singlefin #markrichardssurfboards #markrichardscolordesigns #markrichardssprays #mrtwinfin #mrretrotwinfin #twinfinsrule #twinfinfever #twinfinfevercatchit #twinfinsforever #mr1981retroworldtitletwinfinreplicamodel #mr1981retrotwinfin #mr1981retrotwinfinmodel #mr1981retroworldtitletwinfinreplica

Read more »

Foe Sale

Foe Sale. A special 1981 Retro Twin Fin model. It’s a recreation of the Twin Fin I rode in the contests on the world tour in 1981. It’s 6’2″ long, 201/2″ wide & 27/8″ thick. Sprayed it in the original colors & all the logos have been printed by Rhema Graphics to match the original board. This model is not available to order. Glassed to last in 6oz with set fins & gloss & polish finish. • DM me with email address for pricing on this board if interested. Sorry but Australia enquiries only I cant ship it overseas. Pick up in Newcastle or Surf Cargo freight only between Sydney & the Goldy. Also can be sent on Surf Freight to Torquay. I will respond to DM enquiries in order. #markrichardssurfboards #markrichardscolordesigns #markrichardssprays #mrtwinfin #twinfinsrule #twinfinfever #twinfinfevercatchit #twinfinsforever #mrretrotwinfin #mr1981retrotwinfin #mr1981retrotwinfinmodel #mr1981retroworldtitletwinfinreplicamodel #mr1981retroworldtitletwinfinreplica

Read more »

MR on Instagram

Follow Mark on Instagram
instagram.com/markrichardssurfboards

Archives