Blog Archives

My friend Tim’s new quiver came back from PSM Glassing just before Xmas

My friend Tim's new quiver came back from PSM Glassing just before Xmas My friend Tim’s new quiver came back from PSM Glassing just before Xmas. They are all “Bushranger” models with the tail shapes varying between round pins & round tails. From Left to Right, the lengths are 7’8″, 7’0″,…

Read more »

Posted in Latest News Tagged with: , , , , , , ,

Five computer cut pre shapes for my friend Tim Ryan’s new quiver

Five computer cut pre shapes for my friend Tim Ryan's new quiver Five computer cut pre shapes for my friend Tim Ryan’s new quiver. They are all “Bushranger” models & the tail shapes will be round pins & round tails. From Left to Right, up against the wall, 7’8″, 7’0″,…

Read more »

Posted in Latest News Tagged with: , , , , , , ,

I’m cleaning up the plan shape outline on a KKL computer cut pre – shape

I'm cleaning up the plan shape outline on a KKL computer cut pre - shape using a Skill 100 planer on its side I’m cleaning up the plan shape outline on a KKL computer cut pre – shape using a Skill 100 planer on its side. It’s a custom order & I’ve re template’d one of my Bushranger models into a 6’2″ step up mini gun…

Read more »

Posted in Latest News Tagged with: , , , , , , , ,

My son Nathan with his new board just back from glassing at PSM

My son Nathan with his new board just back from glassing at PSM My son Nathan with his new board just back from glassing at PSM. It’s a “Bushranger 3″ model, 5’10”, 20″ wide & 23/8″ thick. Fin set up is Thruster using FCS 2 Plugs. He did the Color design. It was started…

Read more »

Posted in Latest News Tagged with: , , , , ,

A couple of EPS – Epoxy boards that Nick Pope glassed for me set up

A couple of EPS - Epoxy boards that Nick Pope glassed for me set up with FCS 2 Plugs A couple of EPS – Epoxy boards that Nick Pope glassed for me set up with FCS 2 Plugs. I shaped them both out of US Blanks EPS foam & Nick glassed them with 4oz glass & Epoxy resin. The rounded square is one of my new “Bushranger 3” Thruster…

Read more »

Posted in Latest News Tagged with: , , , , , , , , , ,

Newcastle Slimes Surf & Skate manager Tim Dickson’s “Bushranger 1” Round Tail model in Mick’s

Newcastle Slimes Surf & Skate manager Tim Dickson's "Bushranger 1" Round Tail model in Mick's glassing bay at PSM Newcastle Slimes Surf & Skate manager Tim Dickson’s “Bushranger 1″ Round Tail model in Mick’s glassing bay at PSM. It’s a step up, 5’9″, 181/2″ wide & 23/16” thick. Tim leaves for…

Read more »

Posted in Latest News Tagged with: , , , , ,

Some boards sprayed by Mono at PSM Glassing in Byron Bay

Some boards sprayed by Mono at PSM Glassing in Byron Bay Some boards sprayed by Mono at PSM Glassing in Byron Bay. From left to right, a 1980 MR Retro Twin fin. A 1978 Retro MR twin fin. Two 1980 Retro Twin Fins. A custom Bushranger 3 model for Dylan Skuse. A 1980 Retro Twin Fin. @markmonostewart2481 @slimes_surf_skate…

Read more »

Posted in Latest News Tagged with: , , , , , , , , , , , ,

My son Nathan with his finished Color design on his new board

My son Nathan with his finished Color design on his new board My son Nathan with his finished Color design on his new board. It’s a “Bushranger 3″ model, 5’10”, 20″ wide & 23/8″ thick. Fin set up is Thruster using FCS 2 Plugs. The design was started by pouring lines…

Read more »

Posted in Latest News Tagged with: , , ,

Part 2, Vision of Nathan using a rubber glassing squegee to spread & remove the

Part 2, Vision of Nathan using a rubber glassing squegee to spread & remove the excess water based paint Part 2, Vision of Nathan using a rubber glassing squegee to spread & remove the excess water based paint. He stared the design by pouring lines of paint onto the foam. Even if you use the same colors & do a similar paint pour none of these designs ever…

Read more »

Posted in Latest News Tagged with: , , , ,

My son Nathan starting to do a color design on his board

My son Nathan starting to do a color design on his board My son Nathan starting to do a color design on his board. He’s pouring water based paint in lines which will be spread with a rubber glassing squeegee. He was indecisive about what colours to use finally deciding on grey, light blue & fluro orange…

Read more »

Posted in Latest News Tagged with: , , ,

MR on Instagram

Follow Mark on Instagram instagram.com/markrichardssurfboards

Archived Posts